View UG-250_6606392.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

evaluation board user guide ug - 250 one technology way ? p. o. box 9106 ? norwood, ma 02 062 - 9106, u.s.a. ? tel: 781.329.4700 ? fax: 781.461.3113 ? www.analog.com evaluation board for 16 - bit, serial input, loop - powered 4 ma to 20 ma dac please see the last page for an important warning and legal terms and conditions . rev. a | page 1 of 12 features full - featured evaluation board for the ad5421 link o ptions pc control in conjunction with analog devices , inc., system d emonstration platform (sdp) pc software for control equipment needed dc power supply unit sdp for pc co ntrol (eval - sdp - cb1z) vo ltmeter or ammeter documents needed ad5421 data sheet software needed ad5421 evaluation software evaluation board description the eval - ad5421 is a full - featured evaluation board, designed to allow the user to easily evaluate all features of the ad5421 loop - powered 4 ma to 20 ma dac. the ad5421 pins are accessible at on - board connectors for external connection. the ad5421 evaluation board is controlled via the pc s usb por t in conjunction with analog devices system demonstration p latform board. the sdp board allows the evaluation board to be controlled through the usb port of a windows? xp (sp2 or later) or v ista - based (32 - bit) pc using the ad5421 evaluation software. the ad5421 serial interface is also accessible at the testpoint connections on the board. device description the ad5421 is an integrated device designed for use in loop - power ed 4 ma to 20 ma smart transmitter applications . the ad5421 , in a single chip , provides a 16 - bit dac and current amplifier for digital control of the loop current, a voltage regulator to power the entire transm itter, a voltage reference, fault alert functions, flexible spi - compatible serial interface, gain and offset adjust registers as well as other features and functions. complete specifications for the ad5421 are available in the ad5421 data shee t available from analog devices and should be consulted i n conjunction with this document when using the evaluation board . functional block diagram system demonstration platform board pc usb port loop+ loop? digital isolation ad5421 eval-ad5421sdz 09701-001 figure 1 .
UG-250 evaluation board user guide rev. a | page 2 of 12 table of contents features .............................................................................................. 1 equipment needed ........................................................................... 1 documents needed .......................................................................... 1 software needed ............................................................................... 1 evaluation board description ......................................................... 1 device description ........................................................................... 1 functional block diagram .............................................................. 1 revision history ............................................................................... 2 evaluation board hardware ............................................................ 3 power supplies ...............................................................................3 link options ..................................................................................3 evaluation board software quick start procedures .....................5 software installation .....................................................................5 software operation .......................................................................5 main window ................................................................................6 evaluation board schematics and artwork ...................................7 ordering information .................................................................... 11 bill of materials ........................................................................... 11 revision history 10/11rev. 0 to rev. a change to figure 4 ........................................................................... 7 3/11revision 0: initial version
evaluation board user guide ug - 250 rev. a | page 3 of 12 evaluation board har dware power supplies the ad5421 evaluation board requ ires one power supply connection from loop ? to loop+ (j7), a voltage in the range from 5.5 v to 52 v can be applied if the on - board mosfet device (u2) is not enabled. with u2 enabled , the voltage limit is the breakdown voltage of u2 , which in this case is 240 v. a load resistor can also be conne cted at j7. link options set t he link options on the evaluation board for the required operating setup before powering on the board. the functions of the link options are described in table 2 . default l ink option setup the defa ult link options are listed in table 1 . table 1 . link options link no. op tion lk1 inserted lk2 b lk4 inserted lk6 inserted lk7 inserted alarm_dir b rint_rext b range0 b range1 b reg_sel0 a reg_sel 1 b reg_sel2 a
ug - 250 evaluation board user guide rev. a | page 4 of 12 table 2 . link options link no. descrip tion lk1 this link connects the v loop input pin to the loop+ voltage via a 20:1 resistor divider. when this link is inserted, the v loop pin is connected to the resistor divid er . when this link is removed, the v loop pin is unconnected and can be connected to another voltage (max imum 2.5 v) via tp26 . lk2 this link enables/ disables the mosfet device. position a disables the mosfet device . position b enables the mosfet device and the loop supply is connected directly to the reg in pin . lk4 this link enables/disables the i c oupler ? digital isolators . when this link is inserted, the isolators are enabled . when this link is removed, the isolators are disabled . lk6 this link should be inserted when the mosfet device is enabled (lk2 in position b) . this link should be removed when the mosfet device is disabled (lk2 in position a) . lk7 this link completes the loop connection if a load resistor is not connected at connector j7 . this link should be inserted if a load resistor is not connected at connector j7 . this link should be removed if a load resistor is connected at connector j7 . alarm_dir this link selects the alarm current direction. position a selects an upscale alarm current (22. 8 ma or 24 ma) . position b selects a downscale alarm current (3.2 ma) . rint_rext this link selects to use either the internal or external current setting resistor . position a selects the internal resistor . position b selects the external resistor . range0 , range1 these links select the loop current range. range1 range0 loop range b b 4 ma to 20 ma b a 3.8 ma to 21 ma a b 3.2 ma to 24 ma a a 3.8 ma to 21 ma reg_sel2 , reg_sel1 , reg_sel0 these links select the voltage regulator output voltage. r eg_sel2 reg_sel1 reg_sel0 regulator output voltage b b b 1.8 v b b a 2.5 v b a b 3 v b a a 3.3 v a b b 5 v a b a 9 v a a b 12 v
evaluation board user guide ug - 250 rev. a | page 5 of 12 evaluation board sof tware quick start pr ocedures software installatio n the ad5421 evaluation kit includes self - installing software on a cd. the software is compatible with windows xp (sp2) and vista (32 - b it) . if the setup file does not run automatically, you can run setup.exe from the cd . install the evaluation softw are before connecting the evaluation board and sdp board to the usb port of the pc to ensure that the evaluation system is correctly recognized when connected to the pc. 1. after installation from the cd is complete, power up the ad5421 evaluation board as described in the power supplies section. 2. c onnect the sdp board to the ad5421 evaluation board and then to the usb port of your pc using the supplied cable. either connector of the sdp board may be used. 3. when the evaluation system is detected, proceed through any dialog boxes that appear. this finishes the installation . software operation to launch the software, complete the following steps: 1. from the start menu, select analog devices C ad5421 ; then se lect ad5421 evaluation software . the main window of the software display s (see figure 3 ). 2. if the evaluation system is not connected to the usb port when the software is la unched, or if the ad5421 board is not connected to the sdp board, a connectivity error displays (see figure 2 ). simply connect the evaluation board to the usb port of the pc, wait a nu mber of seconds , click rescan , and f ol low the instructions. 09701-002 figure 2 . connectivity error alert
ug - 250 evaluation board user guide rev. a | page 6 of 12 09701-003 figure 3 . main window main window as can be seen in figure 3 , the main window is made up of 5 tabs; control register , dac register , fault register , program loop current , and c ommand write . outside of the tab structure at the top right of the window are two control items; ldac pin to set the state of the ldac pin and use pec to sel ect whether packet error checking is used in the communications with the ad5421 . there is also an indicator item; pec error , this alerts to a packet error in the data received from the ad5421 . at the bottom of the window is a display of the contents of the fault register, this is updated on every communication with the ad5421 if auto fault readback is enabled. control regi ster the control register tab is displayed by default. this tab allows the user to program the control register. dac register the dac register tab allows the user to program the dac register, offset adjust register , and gain adjust r egister. fault register the fault register tab allows the user to read the contents of the fault register. the fault register c an also be polled continuously. program loop current the program loop current tab allows the user to program a loop current value directly by ent ering the value in millia mps after having f irst select ed the loop cu rrent range that is set by the range0 and range1 link options . command write the c ommand write tab allows the user to read/write all of the ad5421 s registers as well as issue commands.
evaluation board user guide ug - 250 rev. a | page 7 of 12 evaluation board sch ematics and artwork 09701-004 figure 4 . schematic of the ad5421 circuitry
ug - 250 evaluation board user guide rev. a | page 8 of 12 09701-005 figure 5 . schematic of the sdp board connector
evaluation board user guide ug - 250 rev. a | page 9 of 12 09701-006 figure 6 . component placement drawing 09701-007 figure 7 . component side pcb drawing
ug - 250 evaluation board user guide rev. a | page 10 of 12 09701-008 figure 8 . solder side pcb drawing
evaluation board user guide ug - 250 rev. a | page 11 of 12 ordering information bill of materials table 3. reference designator part description part number supplier/number c5 capacitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c6 capacitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c7 capacitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c8 cap acitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c9 capacitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c10 capacitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c11 capacitor , 1 f, 16 v, case a tantalum mccta105m016 f ec 1190114 c12 capacitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c13 capacitor , f/term, 100 n f, 50 v, x7r 06035c104kaz2a fec 1301894 c15 capacitor , 2.2 f, 16 v, case a tantalum mccta225m016 fec 1190115 d1 led, yellow, 0603 ly q971 - h1k1 -36-0-20- r18 digi -k ey 475 -2557-1-nd d2 bas516, high speed switching diodes bas516 fec 8734402 d3 bas516, high speed switching diodes bas516 fec 8734402 d4 diode zener , 4.7 v , 500 mw , sod - 80 flz4v7a digi - k ey flz4v7act - nd j2 header, tin, sil, 32 - way 3-826936-2 fec 5217805 and fec 1212164 (x7) j3 header, tin, sil, 32 - way 3-826936-2 fec 5217805 and fec 1212164 (x7) j4 header, tin, sil, 32 - way 3-826936-2 fec 5217805 and fec 1212164 (x7) j5 2-p in t erminal b lock (5 mm p itch) ctb5000/2 fec 151789 j6 120- way c onnector, 0.6 mm pitch fx8 -120s- sv(21) fec 1324660 j7 3-p in t erminal b lock (5 mm p itch) ctb5000/3 fec 151790 l1 ferrite bead chip, series fb fb fbmh3225hm102nt fec 1651731 l2 ferrite bead chip, series fb fb fbmh3225hm102nt fec 1651731 lk1 2- pin (0.1" p itch) header and shorting shunt m20 -9990246 fec 1022247 and fec 150-411 lk2 3- pin sil header and shorting link m20 - 9990345 and m7567 -05 fec 1022248 and fec 150410 lk4 2 - pin (0.1" pitch) header and shorting shunt m20 - 9990246 fec 1022247 and fec 150 - 411 l k6 2- pin (0.1" pitch) header and shorting shunt m20 -9990246 fec 1022247 and fec 150-411 lk7 2- pin (0.1" pitch) header and shorting shunt m20 -9990246 fec 1022247 and fec 150-411 r1 resistor, 24 k , 0805, 5 ppm pcf0805 -13- 24k -b -t1 fec 1108901 r3 resistor, 220 k , 5%, 50 v, 0.063w, 0603 mc 0.063w 0603 5% 220k fec 9331930 r4 resistor, 1 k , 5%, 50 v, 0.063w, 0603 mc 0.063w 0603 5% 1k fec 9331697 r15 resistor , hrc11 0805 18m rc0805jr - 0718ml yageo (phycomp) fec 9236422 r16 multicomp, resistor, 0603 953 k m c 0.063w 0603 1% 953k fec 1171085 r18 resistor, 0603, 100 k , 1% mc 0.063w 0603 1% 100k fec 9330402 r19 resistor, 0603, 100 k , 1% mc 0.063w 0603 1% 100k fec 9330402 u1 loop powered , 4 ma to 20 ma dac ad5421crez ad5421crez u2 depletion mode , n - channel mosfet bsp129 fec 1214279 u3 digital isolator adum1401arwz adu m1401arwz u5 digital i solator adum1201arz a d um1201arz u6 64k i 2 c s erial eeprom 24lc64 - i/sn fec 9758070
ug - 250 evaluation board user guide rev. a | page 12 of 12 notes esd caution esd (electrostatic discharge) sensitive device . charged devices and circuit boards can discharge without detection. although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy esd. therefore, proper esd precautions should be taken to avo id performan ce degradation or loss of functionality. legal terms and conditions by using the evaluation board discussed herein (together with any tools, components documentation or support materials, the evaluation board), you are agreeing to be bound by the terms and conditions set forth below (agreement) unless you have purchased the evaluation board, in which case the analog devices standard terms and conditions of sale shall govern. do not use the evaluation board until you have read and agreed to the agreemen t. your use of the evaluation board shall signify your acceptance of the agreement. this agreement is made by and between yo u (customer) and analog devices, inc. (adi), with its principal place of business at one technology way, norwood, ma 02062, usa . subject to the terms and conditions of the agreement, adi hereby grants to customer a free, limited, personal, temporary, non - exclusive, non - sublicensable, non - transferable license to use the evaluation board for evaluation purposes only. customer unders tands and agrees that the evaluation board is provided for the sole and exclusive purpose referenced above, and agrees not to use the evaluation board for any other purpose. furthe rmore, the license granted is expressly made subject to the following additi onal limitations: customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the evaluation bo ard; and (ii) permit any third party to access the evaluation board. as used herein, the term third party includes any entit y other than adi, customer, their employees, affiliates and in - house consultants. the evaluation board is not sold to customer; all rights not expressly granted herein, including ownership of the evaluation board, are reserved by adi. confidentiality. this agreement and the evaluation board shall all be considered the confidential and proprietary information of adi. customer may not disclose or transfer any portion of the evaluation board to any other party for any reason. upon discontinuation of use o f the evaluation board or termination of this agreement, customer agrees to promptly return the evaluation board to adi. additional restrictions. customer may not disassemble, decompile or reverse engi neer chips on the evaluation board. customer shall inform ad i of any occurred damages or any modifications or alterations it makes to the evaluation board, including but not limited to soldering or any other activity that affects the material content of the evaluation board. modifications to the evaluation board mu st comply with applicable law, including but not limited to the rohs directive. termination. adi may terminate this agreement at any time upon giving written notice to customer. customer agrees to return to adi the evaluation board at that time. limitation of liability. the evaluation board provided hereunder is provided as is and adi makes no warranties or representations of any kind with respect to it. adi specifically disclaims any representations, endorsements, g uarantees, or warranties, express or im plied, related to the evaluation board including, but not limited to, the implied warranty of merchantability, title, fitness for a particul ar purpose or noninfringement of intellectual property rights. in no event will adi and its licensors be liable for any incidental, special, indirect, or consequential damages resulting from customers possession or use of the evaluation board, including but not limited to lost profits, delay costs, labor costs or loss of goodwill. adis total li ability from any and all causes shall be limited to the amount of one hundred us dollars ($100.00). export. customer agrees that it will not directly or indirectly export the evalua tion board to another country, and that it will comply with all applicable united states federal la ws and regulations relating to exports. governing law. this agreement shall be governed by and construed in accordance with the substantive laws of the commonwealth of massachusetts (excluding conflict of law rules). any legal action regarding this agreem ent will be heard in the state or federal courts having jurisdiction in suffolk county, massachusetts, and customer hereby submits to the personal jurisdiction and venue of such courts. the united nations convention on contracts for the internation al sale of goods shall not apply to this agreement and is expressly disclaimed. ? 2011 analog devices, inc. all rights reserved. trademarks and registered trademarks are the property of their respective owners. ug09701 - 0 - 10/11(a)

▲Up To Search▲

Price & Availability of UG-250

	To Download UG-250 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .